How To: Reindeer Christmas Card Tutorial

Today I'm sharing another paper crafting tutorial: how to make a Christmas card featuring a cute reindeer!

This tutorial is sponsored by Bostik, and is part of a series of crafty projects I'm sharing using their range of adhesives.

So far I've also made a giant floral hula hoop wreath, some autumn leaf cards, some fun 3D cards, and a cute autumn scene in a mason jar.

Whether you send cards to all your friends each year or just have a couple of special people you want to send a note to this holiday season, handmade Christmas cards are such a joy to make and receive.

I'm really pleased with how these reindeer cards turned out, and I hope you'll have fun making one (or lots!) to send to people! You could also use the reindeer design for other festive paper crafting projects, like a scrapbook of your family Christmas.

You will need:

- a Bostik Blu Stick (or other glue suitable for sticking paper and card)
- blank cards (I used light blue cards, approximately 15cm / 6 inches square)
- the templates provided at the bottom of this post, sized to fit your cards
- brown paper (I used some old envelopes for this)
- white paper
- gold paper (I used a small bit of shiny gift wrap)
- scraps of Christmas wrapping paper, or other colourful or decorative paper
- a pencil
- a fine black pen
- craft scissors
- a white colouring pencil (optional)
- a red pen (optional)

How to make a reindeer card:

1. Cut out the templates provided: the two antlers, the blanket and the reindeer. Don't cut along any of the internal lines marked on the reindeer template!

2. Use the templates to cut out one of each piece, turning the template over and carefully drawing around it with a sharp pencil then cutting out the shape.

I used old brown paper envelopes for the reindeer, some shiny gold wrapping paper for the antlers, and some nice Christmas wrapping paper for the blanket.  

Remember: if the paper you're using has a right and wrong side, make sure you draw the shape on the wrong side of the paper so the side you want will be on top when you turn the finished shape over. 

Cutting out the antlers is a little fiddly, so take your time!

Tip: If you wanted to make a lot of these cards, you could glue the paper templates to some sturdy card and cut them out again to make templates which would be easier to draw around.

3. Roughly arrange the pieces on your chosen card, so you can make sure all the pieces fit together neatly and plan their final position on the card.

I chose light blue cards for my deer, so I could add a bit of white paper snow and the blue would become the sky. If you're using another colour of card, you can skip the snow if you want!

Then cut a piece of white paper to form the snow, cutting a wobbly line for the top of the snow. Make sure the paper is large enough to fill the space you want and to overhang the edges of the card. 

4. Cover the piece of paper with craft glue and carefully press it in place on the bottom of the card so the edges of the paper overlap the card, as shown.

I used a Bostik Blu Stick for glueing all the pieces of my Christmas card together - it's perfect for sticking paper and card, and it starts out blue then goes clear which is really helpful when you want to make sure you've evenly covered a shape in glue!

 

Place the card face down then leave it to dry. When the glue has dried completely, carefully cut away the excess white paper (cutting flush with the edge of the card) so you're left with a neat section of snow on the front of the card.

5. Add glue to the back of the deer shape and stick it in position.

I like to use scrap paper when sticking shapes like this: placing the shape face down on the scrap paper, covering the shape completely in glue (the scrap paper means you can quickly cover the shape without worrying about going over the edges and making a mess), then lifting it off the scrap paper and sticking it in place.

 
6. Then use more glue to stick the antlers and blanket in place, as shown. Take extra care when sticking the antlers as the shapes can be a little delicate!

7. Use the lines on the template as a guide to add the details to the deer: the eyes and nose, the lines of the ears and legs, and the strap holding on the blanket. I drew these with pencil first then a fine black pen, colouring in the eyes and nose with the same pen. For a red-nosed reindeer, simply use a red pen!

8. To add a final detail: colour in the insides of the ears with a white colouring pencil.

You could also give your card some extra sparkle by adding silver or white glitter to the snow!

Your finished card will look something like this:

DISCLOSURE: this post is sponsored by Bostik, who also provided the Blu Stick I used to make the Christmas cards.

Click here to open the template sheet in a new window, make sure you're viewing it full size then print them at 100% (or shrink/enlarge as needed for your cards).

P.S. For lots more free Christmas craft projects, visit my tutorial archive!