A Year of Wreaths: August Felt Ice Cream Wreath Tutorial

This month’s wreath design is inspired by delicious ice cream, the trend for Instagram-friendly “unicorn food”, and the way we all share our holiday snaps on social media.

The wreath features a large, colourful felt ice cream topped with sequin and bead “sprinkles”, a pair of heart-eye emojis, an “OMG!” speech bubble, and lots of felt hearts.

If you don’t fancy making the whole wreath, the ice cream would look fab appliqued to a cushion cover or a bag, or worn as an awesome statement brooch. The emojis and speech bubble would also make cute brooches or patches - as well as stitching “OMG!” in the speech bubble you could also stitch “WOW!” or “YAY!” or other short words.

This tutorial originally appeared on The Village Haberdashery's blog - visit their shop for lots of crafty goodness! I'm sharing all twelve seasonal wreath tutorials here on my blog as the year progresses.

You will need:

The template sheets (click here to view, download and print the PDF)
A 30cm polystyrene ring wreath base
Half a metre of Kona cotton in Baby Pink (or other fabric of your choice)
Wool blend felt in the following colours: yellow, red, black, bright pink, white, light brown, light blue, light pink, and lilac
Sewing threads to match all the felt colours
Black embroidery thread
Embroidery thread to match the beige felt
Assorted sequins, bugle beads and seed beads in co-ordinating colours
Sewing scissors
Embroidery scissors (great for cutting out small or detailed felt shapes)
Sewing needle and pins
A small piece of semi-transparent paper (tracing paper, white tissue paper or baking paper) and a fine black pen, OR an air-erasable fabric marker pen
A glue gun and glue
A heat-proof mat for the glue gun
Newspaper to protect your workspace from any glue drips
Optional: a piece of co-ordinating yarn or ribbon for hanging the wreath

To make the wreath:

1. Use the template provided to cut out 25 pieces from your chosen fabric  for wrapping the wreath base. You may need to cut a few more strips later to finish wrapping the wreath, but it’s better to cut fewer strips to start with than end up wasting fabric!

2. Add the fabric strips to the wreath base one by one, using a glue gun to secure the ends at the back of the wreath. Overlap the fabric strips so there are no gaps where the polystyrene base can show through. For each fabric strip, add a dab or two of hot glue to the back of the wreath then carefully press the fabric into position. If required use the template to cut more fabric strips, adding them until the whole base is covered in fabric.

IMPORTANT: take care when working with the glue gun as the glue gets very hot! Always place it on a heat-proof mat when not in use, and use newspaper or other scrap paper to protect your workspace. Work slowly, squeezing the gun with care to control the amount of glue you’re using and keeping your fingers out of the way of the hot glue.

The wreath base will now look something like this:

3. Use the templates provided to cut out the emoji pieces: four yellow circles, four red heart eyes, and two black smiles. Arrange the small pieces on two of the circles, as shown, sewing them in place with running stitch and matching sewing thread. Then sew each decorated circle to a backing plain circle, joining them with yellow sewing thread and whip stitch.

4. Use the templates provided to cut out the heart pieces: six large bright pink hearts and eight small red hearts. Sew two layers of each shape together with whip stitch and matching sewing thread, making a total of three large pink hearts and four small red ones.

5. Use the templates provided to cut out two speech bubbles from white felt. Trace the “OMG!” text onto a small piece of white tissue paper, tracing paper or baking paper with a fine black pen. Position the text in the centre of one of the speech bubble pieces and pin it in place, sew it with large tacking stitches (avoiding the text itself) then remove the pins.

If you have an air-erasable fabric marker pen you can skip the paper pattern if you want and just write “OMG!” directly onto one of the felt pieces. 

6. Stitch the text with backstitch and black embroidery thread (using half the available strands – so, for six-stranded embroidery thread just use three strands). Then remove the tacking stitches and carefully tear away the paper.

7. Sew the decorated front of the speech bubble to the plain backing piece using whip stitch and white sewing thread.

8. Use the templates provided to cut out the ice cream pieces: one light blue top scoop, one lilac middle scoop, one light pink bottom scoop, and one each of the cone pieces from beige felt.

Pin all the pieces onto a large piece of pink felt as shown (any colour felt will do for this, but make sure to use the same colour again in step 9) then trim away the excess felt, leaving a rough border around the ice cream. The ice cream should be approximately 26 cm high.

9. Begin sewing the ice cream pieces to the backing felt, using matching sewing threads and sewing only along the inside edges of the shape (i.e. not where you’ll be trimming away the excess backing felt later). Whip stitch along the bottom edges of the top two ice cream scoops then sew the top edges of the cone with one stitch between each scallop.

10. Sew a crisscrossed design on the ice cream cone to create a waffle effect. Use backstitch and half strands of matching embroidery thread, sewing lines in one direction and then the other as shown. Sew the lines freehand (they don’t have to be perfectly straight!) or use an air-erasable fabric marker pen to draw guide lines for your stitching.

11. Decorate the top scoop of the ice cream to look as if it’s been covered in sprinkles. Add seed beads, bugle beads, and sequins, or use lots of different colours of embroidery thread to create stitched sprinkles. I started with large sequins, then added bugle beads and smaller sequins, and then filled in the spaces with seed beads.

12. Carefully trim the excess backing felt from around the ice cream, taking care not to accidentally snip any of your stitching.

13. Use the ice cream as a template to cut out a matching backing piece of felt (I used pink felt for this, as before). Pin the layers together then whip stitch around the edges. Sew each section with matching sewing thread, removing the pins as you sew.

You should now have a collection of felt elements ready to add to your wreath.

14. Arrange the felt pieces on the wreath as pictured and use pins to hold them in position.

One by one, remove the pins and secure the felt pieces with a dab or two of hot glue. To attach the large pieces, add some glue to the wreath base then carefully press the shapes down into position.  To attach the smaller pieces, add a dab of glue directly to the back of the felt shape then very carefully press it in position on the wreath.

Your wreath is now finished! Add a length of yarn or co-ordinating ribbon for hanging the wreath, or hang it directly from a hook or nail.


Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

This tutorial is for non commercial use only: you can use it to make as many wreaths as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!

A Year of Wreaths: July Felt Pinwheels Wreath Tutorial

This month’s wreath is inspired by days at the seaside and those colourful spinning pinwheels you buy as a kid to stick triumphantly on top of your sandcastles.

The felt versions are super easy to make and would also make fab brooches or gift toppers. They don’t spin like the real thing, but I hope they’ll remind you of lots of happy days at the beach all the same!

This tutorial originally appeared on The Village Haberdashery's blog - visit their shop for lots of crafty goodness! I'm sharing all twelve seasonal wreath tutorials here on my blog as the year progresses.

You will need:

The template sheet (click here to view, download and print the PDF) IMPORTANT: wait until step 4 to cut along the dotted lines on the templates!
A 30cm polystyrene ring wreath base
Half a metre of Kona cotton in Turquoise (or a fabric of your choice)
Wool blend felt in the following colours: pink, orange, yellow, and green (or four colours of your choice)
Three coordinating buttons – I used some fun pink and white polkadot buttons
Pink sewing thread
Four paper straws
Sewing scissors
Sewing needle and pins
Scissors and sticky tape
A glue gun and glue
A heat-proof mat for the glue gun
Newspaper to protect your workspace from any glue drips
Optional: a piece of twine or co-ordinating ribbon for hanging the wreath

To make the wreath:

1. Use the template provided to cut out 25 pieces from your chosen fabric for wrapping the wreath base. You may need to cut a few more strips later to finish wrapping the wreath, but it’s better to cut fewer strips to start with than end up wasting fabric!

2. Add the fabric strips to the wreath base one by one, using a glue gun to secure the ends at the back of the wreath. Overlap the fabric strips so there are no gaps where the polystyrene base can show through. For each fabric strip, add a dab or two of hot glue to the back of the wreath then carefully press the fabric into position. If required use the template to cut more fabric strips, adding them until the whole base is covered in fabric.

IMPORTANT: take care when working with the glue gun as the glue gets very hot! Always place it on a heat-proof mat when not in use, and use newspaper or other scrap paper to protect your workspace. Work slowly, squeezing the gun with care to control the amount of glue you’re using and keeping your fingers out of the way of the hot glue.

The wreath base will now look something like this:

3. Use the square templates provided to cut out three outer squares from pink felt and one inner square each from yellow, orange and green felt.

4. Cut along the dotted lines on the templates, then use the templates to cut the same lines on your felt squares.

5. Place each small inner square on top of one of the larger outer squares, lining up the pieces neatly as shown.

6. Carefully fold one of the points of the pinwheel inwards, so the point slightly overlaps the centre of the square. Sew the point in position with one or two small stitches of matching pink sewing thread.

Then repeat this process three more times, folding every other point into the centre and sewing it in place.

7. Add a button to the centre of the pinwheel, stitching it securely with pink sewing thread.

Repeat steps 6 and 7 to construct the other two pinwheels. Make sure you fold the same points down on each pinwheel, so they match each other.

8. Arrange the pinwheels and paper straws on the wreath, pinning the felt pieces in place. For the central straw to reach across the middle of the wreath you’ll need to extend it slightly – cut a section from another straw and attach it with clear sticky tape. Make sure the extended end is hidden under the felt pinwheel!

9. Use a glue gun to very carefully stick the straws and felt shapes in position. Stick the straws first, adding a very small amount to the bottom end of each straw (so the glue won’t be visible) and a larger amount at the top (where the glue will be hidden under the felt). Then glue the pinwheels in place on top.

10. If needed, cut a length of twine or co-ordinating ribbon and knot it securely around the top of the wreath. Use this to hang the wreath in your chosen spot, or just hang the wreath directly onto a hook or nail.


Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

This tutorial is for non commercial use only: you can use it to make as many wreaths as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!

New in My Shop: 3 Fun Felt Brooch Patterns - Sew Teacups, Rainclouds & Tree Stumps

I added three new PDF patterns to my shop yesterday - another bargain pattern bundle!

 

 

With this trio of simple step-by-step tutorials you can sew three different felt brooches: little teacups, rainclouds, and tree stumps.

There are clear photos and instructions for each step of the process, and different size options for the templates so you can make bigger brooches than mine if you'd like.

I used the medium teacup templates yesterday to sew this floral teacup - isn't it cute?

 

 

 
These would be so perfect for using up scraps of pretty floral fabric you can't bear to throw away. I've had that scrap of Liberty Tana Lawn in my stash for years and am so glad to have found a use for it! If I still sold handmade items I would definitely be adding this version of my little teacups design to my product range and can't help myself from picturing a whole row of brooches with different floral prints and different colours of embroidered detailing to match the fabrics.

The good news is that this is something you can do if you'd like! When you buy any patterns from my shops (including the bargain bundles) you have my permission to sell items any items you sew from them, as long as you credit me as the designer.

Click here to buy the pattern bundle from my shop - it'll be available to download and print immediately after your payment goes through! For even more of a bargain, shop before June 27th to get this bundle at the launch price.

P.S. All of these patterns were originally shared with my newsletter subscribers - click here to sign up for crafty updates from me and/or a monthly free project!

Crafting With Felt Flowers: Floral Crown Tutorial

Sew a pretty felt flower crown or headband!

Throughout this week I'm sharing ideas for crafting with felt flowers, and ways to re-use the flower templates from my April Felt Flowers Wreath tutorial. Today I'll show you how to make a floral crown that's perfect for parties, festivals or even weddings.

This tutorial was originally designed for The Village Haberdashery's blog and was created using felt and other craft supplies from their shop.

You will need:

- The flower templates from my April wreath tutorial
- Wool felt in assorted colours
- Embroidery thread to match the felt
- 1 metre ribbon
- Sewing needles and pins
- Sewing scissors or embroidery scissors (these are great for cutting out detailed felt shapes!)

To make the floral crown:

Use the flower templates to cut out the flower pieces from felt (see step 1 of the wreath tutorial - I’ve used different colours to make the crown, but you’ll need the same quantities as listed to create seven flowers). Arrange the pieces, as shown.

Stitch the flowers with half strands of contrasting embroidery thread (so for six-stranded embroidery thread just use three strands), sewing radiating stitches from the centre of each flower. I stitched nine stitches for each of the larger flowers, and six for the smaller flowers. If you like you can also add some extra stitched details to decorate the flowers, as I did. For extra decoration you could add buttons, beads or sequins to the flower centres.

Cut a metre long piece of ribbon, cutting the ends at an angle to help prevent fraying. Pin the flowers onto the ribbon starting with the largest flowers in the centre then working outwards.

Sew the ribbon to the back of the flowers, using running or whip stitch in matching sewing thread. Remove the pins as you sew and take care to sew into the felt but not through it, so your stitching won’t show at the front of the crown.

Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

This tutorial is for non commercial use only: you can use it to make as many flower crowns as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!